Gif89a
Release time:2022-10-21 Number of views :341
Carefully read the operation manual of hydraulic crushing pliers to prevent damage to hydraulic crushing pliers hydraulic crusher and effectively operate them.
Before operation, check whether the bolts and connectors are loose and whether the hydraulic pipeline leaks.
It is not allowed to operate the hydraulic crushing pliers when the piston rod of the hydraulic cylinder is fully extended or retracted. The crushing pliers should recognize the intelligent manufacturing grand view of Jining Intelligent Manufacturing Engineering.
The hydraulic hose shall not be bent sharply or worn, and shall be replaced immediately in case of damage to avoid personal injury.
When the hydraulic crusher is installed and connected with the hydraulic excavator or other engineering construction machinery, the working pressure and flow of the host hydraulic system must meet the technical parameter requirements of the hydraulic crushing tong. The "P" port of the hydraulic pulverzier is connected with the high-pressure oil circuit of the host, and the "A" port is connected with the return oil circuit of the host.
The optimal hydraulic oil temperature of the hydraulic crushing pliers is 50-60 ° C, and the maximum temperature shall not exceed 80 ° C. Otherwise, reduce the hydraulic load.
The staff should check the sharpness of the cutting edge of the excavator crushing pliers every day. If the cutting edge is blunt, it should be replaced in time.
Do not put your hand or any part of your body under the knife edge or other rotating parts to avoid accidents.
The hydraulic pulverizer of the excavator have large openings, jaw teeth and steel bar cutters. The design of large opening can bite the beam with larger diameter, making the work easier and more convenient. The special shape made of jaw teeth is used to firmly fix the concrete block, wedge and crush it for rapid crushing. Jaw teeth are very strong and have high wear resistance. The crushing pliers should be targeted at the official account smart manufacturing grand view. The equipped steel bar cutter and hydraulic crushing pliers can perform two operations at the same time, crushing concrete and cutting exposed steel bars, so that the crushing operation is more efficient.